Authorized Service Points; Sending Defective Device, Instrument Or Part To Oertli - OERTLI OS 4 Service Manual

ERROR 268 Laser: user protection filter malfunction
ERROR 269 Laser: beam switch malfunction
ERROR 273 Laser: I2C IO expander malfunction
ERROR 274 Laser: processor malfunction
15

Authorized service points

Oertli Instrumente AG
Hafnerwisenstrasse 4
Customer service and support
CH – 9442 Berneck, Switzerland
Tel.: +41 (0)71 747 42 00
E-mail: css@oertli-instruments.com
Website: www.oertli-instruments.com
Contact your local distribution partner or Oertli Instrumente AG for information on service points in your country authorized
by Oertli.
15.1

Sending defective device, instrument or part to Oertli

1. Clean and sterilise instruments before returning them to the service point.
2. Fill out the QMF 17.09E and QMF 17.15E
3. Send device, instrument or part in appropriate packaging to the service point.
2021-03-23 / Rev. 10
- Press «OK, disable LASER» to disable the laser
function. All other functions of the OS 4 remain availa-
ble.
- Call for laser second level support
- Press «OK, disable LASER» to disable the laser
function. All other functions of the OS 4 remain availa-
ble.
- Call for laser second level support
- Press «OK, disable LASER» to disable the laser
function. All other functions of the OS 4 remain availa-
ble.
- Call for laser second level support
- Press «OK, disable LASER» to disable the laser
function. All other functions of the OS 4 remain availa-
ble.
- Call for laser second level support
VV016042 129