Wireless Module; Cable For Pedal - OERTLI OS 4 Service Manual

13.11 Wireless module

VX400285
Quantity Description
1 Wireless module with cable

13.12 Cable for pedal

VX102522
Quantity Description
1 Cable for pedal
The new cable can be replaced without taking any specific action.
2021-03-23 / Rev. 10 VV016042
STEP 1:
1. Open pedal housing according to the
procedure described in 13.1.
2.
Unfasten the 2 screws that hold the
wireless module in place.
3.
Disconnect cable from the PCB and
remove the module.
Following this procedure, the pe-
dal must be paired with the unit
according to 7.5.
123