Table of Contents
Advertisement
11.3.6
Exchange of Connecting cable laser to UPF connector
VX400300
Quantity
Description
1
Connecting cable laser to UPF connector
2021-03-23 / Rev. 10
VV016042
STEP 7:
12.
Lift module out of the unit.
NOTE!
Improper packaging used
Misalignment of optical com-
ponents
► Use proper packaging (e. g.
laser packaging from the
manufacturer) to dispatch
the laser module.
STEP 8: Installation
13.
Execute the calibration of the target
and the power laser according to
chapters 9.7.3 and 9.7.4. This
will ensure the correct power output
of the lasers.
STEP 1:
1.
Open the UPF socket with a Lemo
key (DCH.91.161.PA), do not
loosen completely, otherwise the
toothed lock washer could be lost.
Remove isolation transformer as-
sembly to get access to the laser
module.
101
Advertisement
Table of Contents
