13.6
Sensors
13.6.1
Horizontal pedal sensor
VX310078 Pedal sensor horizontal
Quantity
Description
1
Pedal sensor horizontal
2
M3x12 oval head screw, TORX, ecosyn-fix
2
Cable tie
After the exchange of a pedal sensor, the pedal has to be sealed. For this purpose, additionally order
VX102479 sealing set (see chapter 13.2)!
2021-03-23 / Rev. 10
STEP 1:
1.
2.
3.
4.
STEP 2:
5.
6.
7.
VV016042
Open pedal housing according to the
procedure described in 13.1.
Remove battery pack according to
13.3.
Disconnect cable from PCB.
Undo the grub screw.
Push out the wave vertical deflection
component from the base body.
Release spring.
Place rocker in such a way that ac-
cess is given to both sensors.
Do not lose the washers when
pushing out the wave vertical de-
flection and reassemble them
after repair.
Lubricate the wave vertical deflec-
tion before reassembling the pe-
dal.
116