Trouble Shooting - OERTLI OS 4 Service Manual

8.1.4

Trouble shooting

Error message
Invalid or no database file se-
lected. Choose correct file.
Database import failed
Wrong schema version
ERROR: check for laser pedal
assignments failed
ERROR: setting laser pedal as-
signments failed
Laser pedal assignments can-
celled
ERROR: check for pedal as-
signments failed
Pedal assignments cancelled
ERROR: setting pedal assign-
ments failed
ERROR: changes not com-
pletely defined
ERROR: database not complete
ERROR: Correction of depend-
ent parameters failed
ERROR: sorting data failed
ERROR: database export failed
ERROR: xxxxxxxx_surgeon al-
ready exists
ERROR: xxxxxxxx_sur-
geon.edb.1.3.1 already exists
2021-03-23 / Rev. 10
Description
No or incorrect file has been selected.
Database could not be imported.
Database has incorrect scheme ver-
sion.
Contradiction as regards laser pedal
assignments.
Error occurred when setting laser pe-
dal assignments to default.
Appears after clicking on "Cancel"
button. Conversion process is
aborted.
Contradiction as regards pedal as-
signments.
Appears after clicking on "Cancel"
button. Conversion process is
aborted.
Error occurred when setting pedal as-
signments to default.
Error in the script as regards the defi-
nition of conversion data.
The loaded database is not complete.
Error occurred when correcting the
parameter dependencies due to obso-
lete parameter values
Error occurred when converting the
database.
Database could not be exported.
Error occurred when exporting, as tar-
get file already exists.
Error occurred when exporting, as
backup file already exists.
VV016042
Solution
Select valid export file.

Use valid database file.

Use correct version of conversion
tool.
Select valid export file (try export again
from the device).

Use valid database file.

Use correct version of conversion
tool.
Set pedal assignments for required sur-
geons correctly (in the ParaProg) and ex-
port database again.
Select valid export file (try export again
from the device).
Set pedal assignments for required sur-
geons correctly (in the ParaProg) and ex-
port database again.

Use valid database file.

Use correct version of conversion
tool.
Use correct version of conversion tool.
Use valid database (try export again from
the device).

Use valid database file.

Use correct version of conversion
tool.
Use correct version of conversion tool.
If error message occurs in combination
with one of the messages mentioned be-
low: Observe the solution indicated for the
messages below.
If not:

Use correct version of conversion
tool.

Target directory must not be write-
protected.
Delete or relocate the relevant file from the
target directory.
22