Table of Contents
Advertisement
SETUP AND CALIBRATION, CONT.
Press the ENTER key to see the current password value. If the password displayed is
acceptable, press the ENTER key again to save it. Otherwise, using the numeric keys enter
the new password (up to 6 digits) and then press the ENTER key to save it.
Password Operation
With the PASS prompt enabled (set to YES), anytime the operator tries to enter Setup, the
display will show the PASS= prompt requiring the operator to enter the correct password. If
the wrong password is entered the indicator displays ERROR momentarily and returns to the
weight mode. Note that the password is not displayed when the operator is entering it.
It is recommended to write the password down and store it in a secure location. If the
password is forgotten or lost and a change to the indicator setup is required, the indicator
must be reprogrammed. WARNING! Reprogramming the indicator will erase all the
contents of the Nov-Ram and memory.
LFt= (Legal For Trade)
Press the ENTER key to show the current value. If the setting displayed is acceptable, press
the ENTER key again to save it. Otherwise, using the numeric keys, 0/NO or 1/YES, enter the
new setting, then press the ENTER key to save it.
LFt=1
Interval Settings (Int=) allowed
are: 1, 2, 5, 10 , 20, 50
NOTE: When both
Scale must have between 100 and 10,000 divisions
Tra = .5 or 0 to 3
Inhibit serial data during input
Disables counting function in Normal Scale mode of operation (oPEr=0)
Date = mm/dd/yy
Trl = no
Cap + 4% to OC
Display will show Accn
accumulator is updated
LFt=1
NOTE: When
Uns = 1
Date = dd/mm/yy
Trl = yes
Cap + 9 grads to OC
PT printed with tare
Lamp test on power up
Display will show Accn
accumulator is updated
Unit1= (Weighing Unit 1)
Press the ENTER key to show the current value. If the setting displayed is acceptable, press
the ENTER key again to save it. Otherwise, using the numeric keys enter the new setting, then
press the ENTER key to save it. Allowable values are:
0 = none
1= tn (tons)
2= g (grams)
3 = lb (pounds)
8200-0727-2M Rev A 210FE Installation & Technical
LFt=0
LFt=1
USA=1
and
, the followings results occur:
ud momentarily whenever the Gross or Net
m
USA=0
and
, the followings results occur:
ud momentarily whenever the Gross or Net
m
4 = oz (ounces)
5 = kg (kilograms)
6 = tonnes (metric tons)
7 = lb/oz (pounds/ounces)
Interval Setting (Int=) is
selectable from 1 to 99.
33
Advertisement
Table of Contents
