Section 5: Service & Maintenance; Firmware Updates; Restore Factory Settings - Ismatec MASTERFLEX MFLX78018-10 Operating Manual

Section 5: Service & Maintenance
SECTION 5: SERVICE & MAINTENANCE
!
CAUTION: Replace the power cord only with one of the same type and rating.
CAUTION: Unplug the pump drive's power cable from the mains power outlet when cleaning
!
or performing maintenance on the drive.

FIRMWARE UPDATES

If the REGLO is connected to the internet, updates can be downloaded directly onto the pump drive.
NOTE: When new updates are available for your device, the update available
top of the Settings Menu Screen.
To update REGLO:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE INFORMATION. Th e Device Information Screen will be displayed.
4. Tap CHECK FOR UPDATES and follow the onscreen prompts.
If the REGLO is not connected to the internet, updates must be downloaded onto a USB drive before
installing onto the pump drive. Visit
To install updates from a USB drive:
1. Insert the USB drive containing the updates into the pump drive's USB port.
2. Tap SETTINGS
3. SCROLL
4. Tap DEVICE INFORMATION.
5. Tap CHECK FOR UPDATES and follow the onscreen prompts.

RESTORE FACTORY SETTINGS

NOTE: Factory reset will erase all settings, including custom programs.
To restore the pump to the original factory defaults:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE INFORMATION.
4. Tap FACTORY RESET and follow the onscreen prompts.
5-1 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE INFORMATION.
www.masterfl ex.com
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE INFORMATION.
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE INFORMATION.
to download the latest updates for your device.
icon will be displayed at the
Masterflex