Settings; Language Settings; Setting The Time - Ismatec MASTERFLEX MFLX78018-10 Operating Manual

Section 2: Basic Setup & Settings

SETTINGS

Th e Settings Screen allows access to basic confi guration settings. Th e Settings Screen is accessed by tapping
SETTINGS
authorization can access the Settings Screen (for further information see
Update Available
When the REGLO is connected to the
internet this icon indicates that an
update is available for installation (see
"Firmware Updates" on page 5-1)
Settings Menu

Language Settings

Th e REGLO Digital Pump Drive can display Chinese, English, French, German, Italian, Japanese, and
Spanish languages. Th e default display language is English.
To change the display language:
1. Tap SETTINGS
2. Tap LANGUAGE.
3. Select the desired language from the available list.
4. Tap CONFIRM

Setting the Time

To change the time:
1. Tap SETTINGS
2. Tap TIME.
3. Select either 12-HOUR or 24-HOUR time.
4. Tap HH to select hours and enter the desired time using the onscreen keypad.
5. Tap MM to select minutes and enter the desired time using the onscreen keypad.
6. If using 12-HOUR time, tap AM/PM to select either AM or PM.
7. Tap CONFIRM
3-3 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens. NOTE: If User Management is enabled only users with
from any of the mode screens. Th e Settings Screen will be displayed.
to save the new language selection.
from any of the mode screens. Th e Settings Screen will be displayed.
to save or CANCEL
to discard changes.
"User Management" on page 3-7).
Confirm
Connectivity Status
The icon will change to green
when the pump is connected
to MasterflexLive™
Scroll
Masterflex