Section 4: Communication Specification; Ethernet/Ip Mode; Ethernet/Ip Setup - Ismatec MASTERFLEX MFLX78018-10 Operating Manual

Section 4: Communication Specification

SECTION 4: COMMUNICATION SPECIFICATION

ETHERNET/IP MODE

In Ethernet/IP mode, the pump can be operated in Continuous, Volume and Time modes. Th e pump drives
are equipped with Ethernet/IP for real time control via a PLC. Th e .EDS command fi le is avialable for down-
load on the ODVA website:
https://marketplace.odva.org/products/1923-masterfl ex?lang=en

Ethernet/IP Setup

Ensure that your Pump and PLC along with your computer are all connected to the same network. Also,
make sure the computer's IP address is within the subnet mask range of the PLC and the pump. Th e default
addressing methods for the pump is DHCP. Static IP address may be assigned through the Ethernet settings
menu.
4-1 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
Masterflex