Device Information; Screen Saver; Device Name - Ismatec MASTERFLEX MFLX78018-10 Operating Manual

Section 2: Basic Setup & Settings

Device Information

Th e Device Information Screen provides pump drive details such as MAC address, IP address, software
version, build date, and fi rmware version. Factory reset and updates are also accessed from the Device
Information Screen.
To access the Device Information Screen:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE INFORMATION. Th e Device Information Screen will be displayed.
See also "Firmware

Screen Saver

Th e REGLO has a screen saver to help extend the display life of the touchscreen. After 30 minutes of
inactivity the REGLO will enter sleep mode and the display will turn off . Tapping the touchscreen will
reactivate the drive.
To enable or disable the screen saver:
1. Tap SETTINGS
2. SCROLL
3. Tap the SCREEN SAVER toggle to select either ON or OFF.

Device Name

Individual names can be assigned to each REGLO Digital Pump Drive to make identifi cation easier when
using more than one pump.
To assign a pump drive name:
1. Tap SETTINGS
2. SCROLL
3. Tap DEVICE NAME. Th e Device Name Screen will be displayed.
4. Enter the desired pump name using the onscreen keypad (up to 8 characters).
5. Tap CONFIRM
3-5 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE INFORMATION.
Updates" on page 5-1, and
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate SCREEN SAVER.
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate DEVICE NAME.
to save or CANCEL
"Restore Factory Settings" on page 5-1.
to discard changes.
Masterflex