Auto Start - Ismatec MASTERFLEX MFLX78018-10 Operating Manual

Section 2: Basic Setup & Settings
Deleting a user:
NOTE: Th ere must always be at least one ADMIN user. ADMIN users cannot delete their own user profi le.
1. Tap SETTINGS
2. SCROLL
3. Tap MODIFY USER.
4. Locate the desired username from the available list and then tap the DELETE USER
next to the username.
5. Tap DELETE to delete user or CANCEL to cancel.
Editing an existing user:
1. Tap SETTINGS
2. SCROLL
3. Tap MODIFY USER.
4. Select the desired username.
5. Edit as required.
6. Tap CONFIRM

Auto Start

Th e REGLO has an auto start that will resume pump operation when power is restored after a power outage.
To enable auto start:
1. Tap SETTINGS
2. SCROLL
3. Tap the AUTO START toggle to select either ON or OFF.
3-8 Masterflex REGLO Digital Pump Drive with Advanced Connectivity
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate USER MANAGEMENT.
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate USER MANAGEMENT.
to save or CANCEL
from any of the mode screens. Th e Settings Screen will be displayed.
through the Settings Screen pages to locate AUTO START.
to discard any changes.
icon located
Masterflex