Mitsubishi Electric FR-E720-0.1 K Instruction Manual page 186

Misoperation prevention and parameter setting restriction
(2) User group function (Pr. 160, Pr. 172 to Pr. 174)
The user group function is designed to display only the parameters necessary for setting.
From among all parameters, 16 parameters maximum can be registered in the user group. When Pr. 160 is set to "1", only
the parameters registered to the user group can be accessed. (The parameters not registered in the user group can not be
read.)
To set a parameter in the user group, set its parameter number in Pr. 173.
To delete a parameter from the user group, set its parameter number to Pr. 174. Set "9999" in Pr. 172 to batch delete
parameters registered.
(3) Registration of parameter to user group (Pr. 173)
When registering Pr. 3 to user group
1.
Confirm the operation display and operation
mode display.
The inverter should be at a stop.
Make sure that the inverter is in PU
operation mode.
(Press
mode.)
2.
Press to choose the parameter setting
mode.
3.
Turn to change the set value to
" ".
4.
Press to display
5.
Turn until Pr. 3 appears.
6.
Press to set.
" " and "
To continue parameter registration, repeat
steps 3 to 6.
184
Operation
in the External operation
.
" are displayed alternately.
Flicker...Registration of Pr. 3 to user group
completed!!
Display
Parameter setting mode
Displays Pr. 173 User group
registration
When Pr. 173 is read, "9999"
is displayed
Select the parameter number
to be registered.