Product Description | 3; Intendend Use; Unintended Use; Part Code - KEB COMBILINE E6 Instructions For Use Manual

3 Product description
3.1 Intendend use
3.2 Unintended use
3.3 Part code
ma_dr_e6-hf-filter-nb-20337731_en
The device series COMBILINE
limit values of high-frequency, conducted interference voltages at the mains input of the
drive controllers.
The filters consist of an LC network, which has a particularly high attenuation in the entire
frequency range. This reduces the effective leakage current of the drive system.
Device type
Series
Design
The COMBILINE E6 filters are characterised by the following features:
• Designed for interference suppression of individual devices.
• They can be used on TN, TT and IT systems.
• Large rated voltage range.
• High saturation strength, designed for shielded motor cable lengths up to 100 m.
• Increasing the interference immunity of the drive controllers.
The filters of the COMBILINE E6 series are only suitable for use in conjunction with drive
controllers. They are intended for the installation into electrical systems or machines.
Technical data and information for connection conditions shall be taken from the name-
plate and from the instructions for use and must be strictly observed.
Operation of our products outside the limits specified in the technical data leads to the
loss of any liability claims and specified approvals/acceptances.
1. and 2. digit Device size
12...33 Input current 12...840 A
3. and 4. digit Series
E6 COMBILINE E6
5.-7. digit Version
T60 Complete filter including housing
8. digit Design / voltage class
1 Back mount filter / 3-phase / 400 V
3 Side mount filter / 3-phase
4 4-conductor filter
5 NHF filter / 3-phase / 400 V
7 DC filter
9. digit Limit class
0 C1
1 C2
2 C3
A C2

Product description | 3

E6 are EMC filter. They serve to comply with normative
HF filter
COMBILINE
Side-mounted
E6
11