Technical data
CONTENTS
This section deals with the following subjects:
Sterilization programs
WARNINGS
WARNING! For your safety and for the safety of your patients:
Never process objects different from those specified in the cycle program table and never exceed the maximum load weight limits
specified in it. Such actions could result in non-sterile conditions at the end of the cycle, could expose people to the hazard of
cross-infections, are considered as an improper use of the sterilizer for which the manufacturer cannot be hold responsible.
An improper use of these profiles will result in wet load at the end of the cycle, exposing the load to a contamination due to
improper storage.
The display reminds the maximum permitted load before starting a cycle. All indications of sterile load or successful completion of
the cycle that are given on the display at the end of the cycle are not valid if the type and quantity of the load are not complied
with.
Lexa | Instructions for Use | MN-111 ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl
83
89
92
93
94
95
96
98
83