Grandstream Networks GRP261X Administration Manual page 98

Randomized Automatic Upgrade within the range of hours of the day or
Randomized
postpone the upgrade every X minute(s) by random 1 to X minute(s).
Automatic Upgrade
The default setting is "No".
Hour of the Day (0- Defines the hour of the day to check the HTTP/TFTP/FTP server for firmware
upgrades or configuration files changes. The default value is 1.
23)
Day of the Week (0- Defines the day of the week to check HTTP/TFTP/FTP server for firmware
upgrades or configuration files changes. The default value is 1.
6)
Device will not challenge NOTIFY with 401 when set to "Yes".
Disable SIP NOTIFY
Default setting is "No".
Authentication
If set to "Yes", the phone will ask the user to upgrade. If there is no response,
Firmware Upgrade the phone will proceed with the upgrade.
If set to "No", the phone will automatically upgrade without user input.
Confirmation
Default is Yes.
Config
Allows users to choose the config upgrade method: TFTP, FTP, FTPS, HTTP
Config Upgrade Via
or HTTPS. The default setting is "HTTPS".
Defines the server path for provisioning.
Currently, the following variables are supported in the provisioning server URL:
• $PN: it is used to identify the directory name of the provisioning server
directory where the corresponding boot files and configuration files are located.
• $MAC: it is used to identify the MAC address of the IP phone.
Config Server Path
Variables $PN and $MAC can be embedded in server URL setting in Web UI
and also in DHCP Option 66. Example (Web UI): /192.168.0.2/$PN_$MAC
Example (DHCP Option 66): tftp://192.168.0.2/$PN_$MAC $PN will be
replaced with phone model, e.g., GRP2615 $MAC will be replaced with
phone's MAC address, e.g., c074ad132f60
Config HTTP/HTTPS
The user name for the HTTP/HTTPS server.
User Name
Config HTTP/HTTPS
The password for the HTTP/HTTPS server.
Password
Enables your ITSP to lock configuration updates. If configured, only the
Config File Prefix configuration file with the matching encrypted prefix will be downloaded and
flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the
Config File Postfix configuration file with the matching encrypted postfix will be downloaded and
flashed into the phone.
XML Config File
The password for encrypting XML configuration file using OpenSSL. This is
Password
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e | 98