Grandstream Networks GRP261X Administration Manual page 50

Auto Provision
Eventlist BLFs
Conference URI
Music On Hold URI
BLF Call-pickup
BLF Call-pickup Prefix
Call Pickup Barge-In
Code
PUBLISH for Presence
Omit charset=UTF-8 in
MESSAGE
Allow Unsolicited
REFER
Special Feature
in the key mode, choose account, enter the value of each extension in the
list.
When option is enabled, empty multi-purpose keys will be automatically
provisioned to the monitored extensions in the "Eventlist BLF" or "Presence
Eventlist".

Disabled

BLF Eventlist

Presence Eventlist
The default setting is "Disabled".
Configures Conference URI for N-way conference (Broadsoft Standard).
Configures Music On Hold URI to call when a call is on hold. This feature
must be supported on the server side.
Configures BLF Call-pickup method:

Auto:
The phone will do either Prefix or barge in code for BLF pickup
depend on which on is set.

Force BLF Call-pickup by prefix:
The phone will only use Prefix as BLF pickup method.

Disabled:
The phone will ignore both BLF pickup method, now the monitored
VPK will only dial the extension if pressed.
The default setting is "Auto".
Configures the prefix prepended to the BLF extension when the phone picks
up a call with BLF key. The default setting is **.
Set feature access code of Call Pickup with Barge-In feature.
Enables presence feature on the phone. The default setting is "Disabled".
Omit charset=UTF-8 in MESSAGE content-type.
The default setting is "Disabled".
Allow Unsolicited REFER to accomplish an outgoing call.

Disabled

Enabled

Enabled/Force Auth
The default setting is "Disabled".
Different soft switch vendors have special requirements. Therefore, users
may need select special features to meet these requirements. Users can
choose from Standard, Nortel MCS, Broadsoft, CBCOM, RNK, Sylantro,
Huawei IMS, PhonePower and UCM Call center depending on the server
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e | 50