Grandstream Networks GRP261X Administration Manual page 56

Bypass Dial Plan
Call Log
Send Anonymous
Anonymous Call
Rejection
Auto Answer
Refer-To Use Target
Contact
Transfer on
Conference Hang-up
Explanation of example rule (reading from left to right):

^1900x. — prevents dialing any number started with 1900;

<=1617>[2-9]xxxxxx — allows dialing to local area code (617) numbers
by dialing 7 numbers and 1617 area code will be added automatically;

1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length.

011[2-9]x — allows international calls starting with 011;

[3469]11 — allows dialing special and emergency numbers 311, 411,
611 and 911.
Note: In some cases, where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider,
the * should be predefined inside the dial plan feature.
An example dial plan will be: {*x+} which allows the user to dial * followed by
any length of numbers.
Enable/Disable the dial plan bypass while dialing through:

Contact

Call History Incoming Call

Call History Outgoing Call

Dialing Page

MPK

API
The default setting is "MPK".
Configures Call Log setting on the phone.

Log All Calls

Log incoming/Outgoing Only (missed calls NOT recorded)

Disable Call Log
The default setting is "Log All Calls".
If set to "Yes", the "From" header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed. Default is "No".
If set to "Yes", anonymous calls will be rejected. The default setting is "No".
If set to "Yes", the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. Default setting is "No".
If set to "Yes", the "Refer-To" header uses the transferred target's Contact
header information for attended transfer. The default setting is "No".
If set to "Yes", when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other parties
will remain in the conference call. The default setting is "No".
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e | 56