Grandstream Networks GRP261X Administration Manual page 57

Disable Recovery on
Blind Transfer
Blind Transfer Wait
Timeout
No Key Entry Timeout
Key As Send
On Hold Reminder
Tone
RFC2543 Hold
Hide Dialing Password
Disable Call Waiting
Ringtone
Account Ring Tone
Match Incoming Caller
ID
Disables recovery to the call to the transferee on failing blind transfer to the
target. The default setting is "No".
Notes:
1) This feature only applies to blind transfer;
2) This feature depends on how server handles transfer. If there is any
NOTIFY from server, this feature won't take effect. If server responds 4xx,
phone should try to recover regardless of this option.
3) During blind transfer, after transferor received 200/202 for REFER, but
there is no NOTIFY from server after 7 seconds, transferor will decide to
recover the call with transferee or not depending on the options. This is the
only case that this option will be applied.
Defines the timeout (in seconds) for waiting SIP frag response in blind
transfer. Valid range is 30 to 300. Default setting is "30".
Defines the timeout (in seconds) for no key entry. If no key is pressed after
the timeout, the digits will be sent out. The default value is 4 seconds. The
valid range is from 1 to 15.
Allows users to configure either the "*" or "#" keys as the "Send" key. Please
make sure the dial plan is properly configured to allow dialing * and # out.
The default setting is "Pound (#)".
If set to "Enabled", phone will play a reminder tone when it has a call on hold.
The default setting is "Enabled".
Allows users to toggle between RFC2543 hold and RFC3261 hold. RFC2543
hold (0.0.0.0) allows user to disable the hold music sent to the other side.
RFC3261 (a line) will play the hold music to the other side. The default setting
is "No".
Allows users to hide the password when the dialing number matches the
configured prefix.
Enables / disables the call waiting feature for the current account. When set
to "Default", global call feature setting will be used. Default value is "Default".
Allows users to configure the ringtone for the account. Users can choose
from different ringtones from the dropdown menu.
Note: User can also choose silent ring tone.
Specifies matching rules with number, pattern or Alert Info text (up to 10
matching rules). When the incoming caller ID or Alert Info matches the rule,
the phone will ring with selected distinctive ringtone. Matching rules:

Specific caller ID number. For example, 8321123;

A defined pattern with certain length using x and + to specify, where x
could be any digit from 0 to 9. Samples:
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e | 57