Destination
Notification
Settings Preferences Audio Control
Headset
Headset Key Mode
Terminated Call
Idle to Busy
Busy to Idle
Open DND
Close DND
Open Forward
Close Forward
Open Unconditional Forward
Close Unconditional Forward
Open Busy Forward
Close Busy Forward
Open No Answer Forward
Close No Answer Forward
Blind Transfer
Attended Transfer
Transfer Finished
Transfer Failed
Hold Call
UnHold Call
Mute Call
IP Change
Auto-Provision Finish
Up to 10 destinations can be configured here. For detailed instruction for this
part, please refer to [OUTBOUND NOTIFICATION SUPPORT] section in
this Administration Guide.
Specifies the message body of the notification for each event that can be
customized with embedded dynamic attributes.
For more details, refer to [OUTBOUND NOTIFICATION SUPPORT]
section in this Administration Guide.
When headset is connected to the phone, users could use the HEADSET
button in "Default Mode" or "Toggle Headset/Speaker".
1. Default Mode:
When the phone is in idle, press HEADSET button to off hook the
phone and make calls by using headset. Headset icon will display
on the screen in dialing/talking status.
When there is an incoming call, press HEADSET button to pick up
the call using headset.
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e
|
70