Grandstream Networks GRP261X Administration Manual page 90

Settings  Voice Monitoring
Session Report
VQ RTCP-XR Session
Report
Interval Report
VQ RTCP-XR Interval
Report
VQ RTCP-XR Interval
Report Period
Alert Report
Warning Threshold for
MosIq
Critical Threshold for
MosIq
Warning Threshold for
Delay
Critical Threshold for
Delay
Display Report
Display Report on Web
UI
Display Report on LCD
Custom Display
Layout on LCD
When enabled, phone will send a session quality report to the central report
collector at the end of each call. The default setting is "Disabled".
When enabled, phone will send an interval quality report to the central report
collector periodically throughout a call. The default setting is "Disabled".
Configure the interval (in seconds) of phone sending an interval quality
report to the central report collector periodically throughout a call. Default is
20 seconds.
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a warning
alert quality report to the central report collector. The valid range is 0 – 49.
The default value is "0".
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a critical
alert quality report to the central report collector. The valid range is 0 – 49.
The default value is "0".
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
The valid range is 0 – 65535 The default value is "0".
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
The valid range is 0 – 65535 The default value is "0".
When enabled, phone will display quality report on WEB UI.
The default setting is "Disabled".
When enabled, phone will display quality report on LCD.
The default setting is "Disabled"
When enabled, phone will display quality report on LCD.
Press "Modify" button to select info to display. Available/Default options are:
Start Time, Stop Time, Local User ID, Remote User ID, Local User IP,
Remote User IP, Local User Codec, Remote User Codec, Jitter, Jitter Buffer
Max, Packets Lost, Network Packet Loss Rate, MOS-LQ, MOS-CQ, Round
Trip Delay, End System Delay, Symmetric One Way Delay.
GRP261x/GRP2624/GRP2634 Administration Guide
Version 1.0.5.48
P a g e | 90