Table of Contents
Advertisement
Chapter 2 Useful Features
5.5
Menu Tree of UEFI Mode
Menu
Controller Management
> View Controller Information
Controller Marketing Name
Serial Number
PCI ID
Host Interface
Device Port Count
PCI Slot Number
Drive Count
Virtual Drive Count
Encryption Capable
Minimum Stripe Size
Maximum Stripe Size
Driver Version
BIOS Version
> Change Controller Properties
Apply Changes
Set Factory Defaults
Set Boot Device
Rebuild Rate
Background Initialization (BGI) Rate
Consistency Check Rate
Disk Coercion
Disk WC
Read Ahead
Auto Rebuild
Auto Resume
> Clear Configuration
Value
LSI Embedded MegaRAID
none
Device-dependent
PCI-E
Device-dependent
Integrated
Device-dependent
No
64 KB
64 KB
30
30
30
1 GB
Disable
Enable
Enable
Enable
Express5800/R120f-1E Maintenance Guide
5. RAID System Configuration
Descriptions
Display of the RAID controller information
Name of the RAID controller
Display may differ due to the restrictions for the
number of digits in the display depending on the
server.
Serial number of the RAID controller
PCI ID of the RAID controller
Host interface
Number of ports
PCI slot number of the RAID controller
Number of Physical Drives
Number of Virtual Drives
Encryption setting
Minimum stripe size
Maximum stripe size
UEFI driver version
UEFI BIOS version
Change of the parameter for the RAID controller
Reflecting the change
Setting to the default value
Setting of the Virtual Drive to start up the OS
Ratio of the Rebuild IO (30%)
Ratio of the Background Initialize IO (30%)
Ratio of the consistency check IO (30%)
Forcibly pack physical drives of different size
Setting of the physical drive caching.
The recommended setting is Enable.
Read ahead setting
Automatic Rebuild setting
Setting whether or not to resume the process
automatically if the system is rebooted during
Initialize, Rebuild, or consistency check.
Clearing the RAID Configuration
135
Advertisement
Table of Contents
