Table of Contents
Advertisement
Chapter 2 Useful Features
4. Create a virtual drive. The procedure for creating a new virtual drive is different from that for adding a
virtual drive. Creating a new virtual drive is to create a virtual drive by using a new physical device.
Adding a virtual drive is to create an additional virtual drive by using an unused area of the existing Drive
Group.
The procedures to create the virtual drive in each case are following below.
Note
4-1. New creation (RAID0/RAID1)
1)
On the screen shown in step 3, select Unconfigured Capacity for Select Drives From.
2)
Select Select Drives, and then select the device type for Select Media Type.
Note
•
Up to eight virtual drives can be created.
•
For RAID10, only creating a new virtual drive is available.
•
For RAID10, the virtual drive is configured with the maximum capacity. You cannot
specify the capacity.
•
The Both option is not available.
•
The options for Select Media Type vary depending on the connected device.
Express5800/R120f-1E Maintenance Guide
5. RAID System Configuration
139
Advertisement
Table of Contents
