Table of Contents
Advertisement
Chapter 3 Appendix
Error Message
C301
SDR mismatch error
Hardware configuration
C302
error.
FAN Structure ID command
C303
error.
Necessary to update SDR
C304
Version for new RAID Card.
C310
Hardware configuration of
cooling is insufficient.
C320
Unmatched PSUs.
C321
System power consumption is
out-of-range in PSUs.
C322
No information for system
power consumption check.
C501
Intel(R) Node Manager is in
Recovery Mode.
Cause
Inconsistency in the hardware
information of the sensor data
record was detected
Illegal hardware configuration was
detected.
Illegal fan control was detected
when RAID Controller is installed.
SDR for RAID Controller is
inappropriate.
Detected that cooling power is
insufficient in this hardware
configuration.
Unmatched power supply units are
configured.
System power consumption
exceeds the power output capacity
limit.
No information is acquired in
checking system power
consumption.
Intel(R) Node Manager is is
Recovery Mode.
Express5800/R120f-1E Maintenance Guide
1. POST Error Message
Solution
Contact your sales representative.
Unplug the power cord, wait for at least 30
seconds, then restart the server. At that time,
check the jumper switch setting on
motherboard. If the same error is detected
repeatedly, contact your sales representative.
189
Advertisement
Table of Contents
