SpeedWrite is a method to improve the performance of WRITE commands to SCSI devices attached to
the FibreBridge 2300 enabled by CLI commands.
SpeedWrite is a method to improve the
performance of FCP WRITE commands to SCSI
devices attached to the FibreBridge. Using the
CLI command SpeedWrite, you can specify the
SCSI bus, target and LUN of a mapped device or
specify [all] to set or get the state of all currently
mapped SCSI devices.
43
ATTO Technology FibreBridge 2300E/R/D Installation and Operation Manual
12 Enhancing performance
SpeedWriteDefault specifies the state of
SpeedWrite for any SCSI devices mapped
manually or via an AutoMap operation. If
enabled, any new SCSI device will use
SpeedWrite performance enhancement by
default.