Temperature
Returns the current internal temperature of the unit in degrees Celsius.
Actions: none
Zmodem
Allows transfer of a firmware image to or from the FibreBridge using the ZMODEM file transfer protocol.
Limits: available only through the RS232 interface
WARNING After a firmware image is downloaded to the FibreBridge, the image is placed into flash memory. During this
time (about 30 seconds), DO NOT remove power to the FibreBridge or the flash may become corrupted.
Actions: Zmodem [Send filename | Receive]
Returns: ZMODEM transfer complete on success
ERROR with status message on failure
Information: get Temperature
Information: none
20