Table of Contents
Advertisement
RouteOffline
Sets a route to offline or reports its status as offline or going offline
Action: set RouteOffline [fp] [fl]
RouteOnline
Sets a route to online or reports its status.
Limits: if route is not currently mapped, command results in
an error message
Action: set RouteOnline [fp] [fl]
ScsiTargets
Returns a list of SCSI devices operational on the referenced SCSI port. Also updates the status of any 'online' maps/routes to 'unavailable' if a
device is not found or 'online' if a device is found.
Action: none
ServicesLUN
Sets and displays the Services LUN for the specified Fibre Channel port. Valid ServicesLUN entries are 0 through (n-1) where n equals the number
of Fibre Channel ports. Valid entries for fl are 0-64. Any map coinciding with a user-specified ServicesLUN must be set to offline before trying to
change a ServicesLUN.
Action: set ServicesLUN [fp] [fl] | [disabled] ]
SaveConfiguration
31
ATTO Technology FibreBridge 2300E/R/D Installation and Operation Manual
Information: get RouteOffline [fp]
Returns: [fp] [fl] [sb] [st] [sl] [Going offline|Offline]
Information: get RouteOnline [fp]
Returns: [fp] [fl] [sb] [st] [sl] [Online|Offline]
Returns:
[line count]
[fp] [fl] [sb] [st] [sl] [Online|Offline]
Information: ScsiTargets [sb]
Returns: [line count]
[sb] [st] [sl] [device type] [vendor ID] [product ID] [revision] [serial
number]
Information: get ServicesLUN [fp]
Returns:
[Line Count]
[fp] [fl]
Advertisement
Table of Contents
