Enhance Performance - ATTO Technology FibreBridge 2370E Installation And Operation Manual
Atto technology fibrebridge 2370e embedable board level: user guide
Hide thumbs
Also See for FibreBridge 2370E:
- Installation and operation manual (50 pages) ,
- Interoperability matrix (1 page) ,
- Specifications (2 pages)
Table of Contents
Advertisement
3
Enter the Administrator ( Admin ) password
where indicated.
4
Enter appropriate information into the New
Admin Password, Confirm New Admin
Password or New Read Only Password and
Confirm New Read Only Password text
boxes.
5
Click Submit.
6
If you have completed all changes for this
session, go to the Restart page and restart the
Fibre Bridge.
Enhance performance
SpeedWrite is a method to improve the
performance of WRITE commands to SCSI tape
devices attached to the FibreBridge.
Using the CLI command SpeedWrite, you can
specify the SCSI bus, target and LUN of a
mapped device or specify [all] to set or get the
state of all currently mapped SCSI devices.
SpeedWriteDefault specifies the state of
SpeedWrite for any SCSI devices mapped
manually or via an AutoMap operation. If
enabled, any new SCSI device uses SpeedWrite
performance enhancement by default.
1
Follow the
Preliminary
2
From the left hand menu, click on Storage
Management.
3
Select the parameters you wish to change.
4
Click Submit.
5
If you have completed all changes for this
session, go to the Restart page and restart the
FibreBridge.
steps.
16
Advertisement
Table of Contents
