Operation - Presto Lifts LIFT-STIK Owner's Manual

5

Operation

This machine is to be operated by trained and/or qualified personnel only.
Before operating this machine, read and understand this manual. Inspect the machine for
excessive wear and/ or damage. If excessive wear or damage is found, remove the machine
from service and contact maintenance personnel. Do not operate this machine until all
necessary repairs are completed. Inspect all precautionary labeling. If any label is missing or
illegible contact the manufacturer for replacement labels. Ensure area is free of debris.
Pinch points and Crush Hazards exist when moving and transporting the machine.
Do not enter under any equipment while moving or transporting. Keep hands, feet,
and loose clothing away from moving equipment.
Never enter beneath the platform unless the machine is unloaded and secured
against lowering.
No personnel are permitted on the platform. Do not sit, stand, or ride.
Loads that may shift during operating must be secured before operating.
Keep hands, feet, and loose clothing away from moving parts.
Do not enter beneath any platform until the load has been removed and the
platform has been secured.
Do not load or unload the machine while moving.
Engage central brake before lifting, lowering, or using as a workstation.
The load's center of mass must be centered on the platform and the load's center
of gravity must be maintained within the area shown in the loading section. Uneven
or off-center loading may cause excessive wear or permanent damage.
When transporting a load, it shall be lowered to the lowest possible position and
secured to ensure the load cannot slide.
Presto Lifts 16 PLS67-285 Manual