Operation - Presto Lifts Dock Lift Series Owner's Manual

5

Operation

Before operating this machine, read and understand this manual. Inspect the machine,
electrical and hydraulic components, controls and cords for excessive wear and/or damage.
If excessive wear or damage is found, remove the machine from service and contact
maintenance personnel. Inspect all precautionary labeling. If any label is missing or illegible
contact the manufacturer for replacement labels. Ensure area is free of debris.
Only authorized, trained and qualified personnel shall operate this machine.
Personnel operating this machine must read and understand this manual.
Never enter beneath the platform unless the machine is unloaded and secured
against lowering using the maintenance device.
Device on page 24.
Personnel are not permitted on the platform unless ANSI MH29.1 compliant
personnel guarding is provided. Guarding must be installed and operational before
use.
Keep hands, feet, and loose clothing away from moving parts during operation.
Verify the area around the machine is clear of debris and/or personnel before
operating.
In the event of a malfunction, disconnect and lock-out the machine. Do not return
to service until the cause of the malfunction has been determined and remedied.
Always keep power and control cords clear of foot and vehicle traffic during
operation.
During operation, operator must be in view of the machine at all times.
When not in use the platform is to be in the fully lowered position.
All lifting eyes on the platform used to position the machine must be removed
before operating the machine or the machine may be damaged.
The load's center of mass must be centered on the platform. Uneven or off-center
loading may cause excessive wear or permanent damage.
For use with two wheel dollies, hand carts, and hand pallet trucks only.
Presto Lifts
See Section 6.1 Maintenance
21 PDL Dock Lift Manual