Presto Lifts LIFT-STIK Owner's Manual page 17

Power ON / OFF switch
Turn ON the lifter to use. Turn OFF when not in use.
Note: It is recommended that when the lift is not in use it be placed on the charger.
Operating the lifter
Power ON / OFF switch
Turn ON the lifter to use. Batteries charge whether turned ON or OFF. If
using within week, ok to leave ON. If not using within week, leave plugged
into wall outlet for at least 5 hours to fully charge, then turn OFF and unplug
from wall outlet for optimum battery life.
Rocker switch
To operate the lifter, use the rocker switch located on the lifter's control panel
on the mast:
⇧
This is used to operate the lifting and lowering function.
⇩
The lifter will lift while the button is pressed (normal speed)
The lifter will lower while the button is pressed (normal speed)
Remote control - 4 buttons (OPTIONAL)
speed)
The remote control has 4 buttons with arrows, which operate as follows:
The remote control symbols
Button no. / Function
1 Lifting
2 Lowering
3 Lifting
4 Lowering
Presto Lifts
Description
The lifter will lift while the button is pressed
The lifter will lower while the button is pressed
The lifter will lift while the button is pressed
The lifter will lower while the button is pressed
17
⇧
Symbol Comments
⇩
Normal speed
⇧
Normal speed
⇩
Reduced speed
Reduced speed
PLS67-285 Manual