Advertisement
Quick Links
PAGE 1 OF 27
Foot Operated Lifts
M100, M200,
M300 & M400
Installation, Operation
and Service Manual
Model Number ___________________
Serial # _________________________
Date placed in service _____________
IMPORTANT: READ CAREFULLY
BEFORE INSTALLING OR OPERATING LIFT
Part orders are subject to a $50 minimum charge.
H-1819
June 30, 2020
0720 IH-1819VND
Advertisement
Related Manuals for Presto Lifts H-1819
Summary of Contents for Presto Lifts H-1819
- Page 1 Service Manual Model Number ___________________ Serial # _________________________ Date placed in service _____________ IMPORTANT: READ CAREFULLY BEFORE INSTALLING OR OPERATING LIFT Part orders are subject to a $50 minimum charge. H-1819 June 30, 2020 PAGE 1 OF 27 0720 IH-1819VND...
- Page 2 This manual was current at the time of printing. To obtain the latest, most updated version, please contact Presto Lifts Customer Service Department or go to our website: www.Pre- stoLifts.com -- you will find a complete list of current owner’s manuals to print.
- Page 3 Presto Lifts with the machine’s serial number. Any claim for breach of this warranty must be received in writing by Presto Lifts within the warranty period. Warranties shall not cover failure or defective operation, caused by misuse, misapplication, negligence or accident, exceeding recommended capacities, or any alteration or repair of the item pur- chased which has not been authorized by Presto Lifts.
- Page 4 Hydraulic Repair Kit for M Series Star Cylinder................20 Figure 8: Backplate Assembly .......................21 Figure 9: Platform Assembly ......................22 Figure 10: Stacker Assembly ......................23 Figure 11: Label Placement Diagram ....................24 H-1819 PAGE 4 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 4...
- Page 5 Where unique situations arise, that are not covered in this manual call Presto Lifts for further instructions. Additional manuals are available upon request or on our web site at www.prestolifts.com.
- Page 6 Ensure that all safety devices are operational and in place. Modifications or Alterations Modifications or alterations to any Presto industrial positioning equipment shall be made only with written permission from Presto. H-1819 PAGE 6 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 6 M100, M200, M300 &...
- Page 7 DO NOT INSTALL OR OPERATE THESE LIFTS WITHOUT CAREFULLY READING THIS MANU- AL. In order to provide for the safe operation of these stackers, Presto Lifts Inc. has identified certain hazards that may occur during the installation, maintenance and use of these lifts.
- Page 8 S A F E T Y related instructions or procedures. I N S T R U C T I O N S (Green Background) H-1819 OWNER’S MANUAL Page 8 M100, M200, M300 & M400 FOOT OPERATED LIFTS PAGE 8 OF 27...
- Page 9 Table 1 – Hydraulic Oil Specifications If the lift will be used at normal ambient temperatures, Presto Lifts supplies the unit with Conoco Super Hydraulic 32 oil. This may be replaced by any other good quality oil with 150 SSU at 100° F and rust and oxidation inhibitors and anti-wear properties.
- Page 10 5. Push ram into inner cylinder -- chevron end last! 6. Reassemble and fill with clean hydraulic jack oil. H-1819 PAGE 10 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 10 M100, M200, M300 & M400 FOOT OPERATED LIFTS...
- Page 11 F I G U R E 2: C106A Clevis Pin CHAIN ROLLER ** SPECIFIC MODEL NUMBER REQUIRED WHEN ORDERING FOR ASSEMBLY CORRECT CHAIN LENGTH H-1819 PAGE 11 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 11 M100, M200, M300 & M400 FOOT OPERATED LIFTS...
- Page 12 Ram Guide Bearing Plate 4 & 2 M433-01 Ram Chevron Set 4 & 2 M434 Ram Chevron Set Washer 4 & 2 H-1819 PAGE 12 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 12 M100, M200, M300 & M400 FOOT OPERATED LIFTS...
- Page 13 Kit Number: 1 = M400-10 Kit Number: 2 = M400-20 Kit Number: 3 = M400-30 Kit Number: 4 = M400-40 Kit Number 5 = M400-50 OWNER’S MANUAL Page 13 M100, M200, M300 & M400 FOOT OPERATED LIFTS H-1819 PAGE 13 OF 27 0720 IH-1819VND...
- Page 14 M440 Release Pin O Ring M413 Pump Check Spring M441 Release Pin M411 Plug M410-D 1 Pin, Spring Roll M443 Gasket OWNER’S MANUAL Page 14 M100, M200, M300 & M400 FOOT OPERATED LIFTS H-1819 PAGE 14 OF 27 0720 IH-1819VND...
- Page 15 Plate, Ram Guide Bearing M424 O Ring, Ram Seal, 813 ID x 1.06 See pages 7 & 8 for availability of individual items. H-1819 OWNER’S MANUAL Page 15 M100, M200, M300 & M400 FOOT OPERATED LIFTS PAGE 15 OF 27...
- Page 16 Plunger O Ring M446 Plunger Nut M447 Washer M448 Plunger Cup M407A Plunger Guide Bearing M407B Seal O Ring 0457 Pump Plunger H-1819 OWNER’S MANUAL M100, M200, M300 & M400 FOOT OPERATED LIFTS Page 16 PAGE 16 OF 27 0720 IH-1819VND...
- Page 17 O Ring, Ram Seal, 813 ID x 1.06 M420 Reservoir Seal O Ring See pages 7 & 8 for availability of individual items. OWNER’S MANUAL Page 17 M100, M200, M300 & M400 FOOT OPERATED LIFTS H-1819 PAGE 17 OF 27 0720 IH-1819VND...
- Page 18 M440 Release Pin O Ring M441 Release Pin Back Up Ring (Split) See pages 7 & 8 for availability of individual items. H-1819 PAGE 18 OF 27 0720 IH-1819VND OWNER’S MANUAL Page 18 M100, M200, M300 & M400 FOOT OPERATED LIFTS...
- Page 19 H-1819 PAGE 19 OF 27 0720 IH-1819VND...
- Page 20 OWNER’S MANUAL Page 20 M100, M200, M300 & M400 FOOT OPERATED LIFTS H-1819 PAGE 20 OF 27 0720 IH-1819VND...
- Page 21 Lock Rings C106A Clevis Pin C104-XX** Lift Chain C114 4 or 8 Bearing N0961 Bolt N0260 Washer ** Specific Model No. Required H-1819 OWNER’S MANUAL Page 21 M100, M200, M300 & M400 FOOT OPERATED LIFTS PAGE 21 OF 27 0720 IH-1819VND...
- Page 22 3/8 Lock Rings C106A Clevis Pin C104** Lift Chain C114 4 or 8 Bearing N0961 Bolt N0260 Washer ** Specifc model number required. H-1819 OWNER’S MANUAL Page 22 M100, M200, M300 & M400 FOOT OPERATED LIFTS PAGE 22 OF 27 0720 IH-1819VND...
- Page 23 Roller Kit M429 Return Spring M436 Foot Lever (pad M437) C101PH2 Swivel Wheel Assembly C100 Floor Lock ** Specifc model number required. H-1819 OWNER’S MANUAL M100, M200, M300 & M400 FOOT OPERATED LIFTS Page 23 PAGE 23 OF 27 0720 IH-1819VND...
- Page 24 F I G U R E 11: ITEM # DESCRIPTION Lock Up-Lock Down Name Plate Do Not Stand On Forks Presto Lifts (Verticle Logo) Load Center Help Line OWNER’S MANUAL Page 24 M100, M200, M300 & M400 FOOT OPERATED LIFTS...
- Page 25 The customer should inspect to ensure it is not received damaged, has no concealed damage or is not incomplete. Parts orders are determined to be complete based upon Presto Lift, Inc. inspection sheets and carrier shipping weights. H-1819 PAGE 25 OF 27 0720 IH-1819VND OWNER’S MANUAL...
- Page 26 Presto Lifts. Customers shipping returns from the Continental US, Canada, or Mexico have thirty (30) days from date of RMA issue to have the product arrive at Presto Lifts’ facility. All merchandise must arrive Free on Board at Presto Lifts’ facility or the shipment will be refused and returned to the sender.
- Page 27 Ordering Replacement Parts Presto Lifts has carefully chosen the components in your unit to be the best available for the purpose. Replacement parts should be identical to the original equipment. Presto Lifts will not be responsible for equipment failures resulting from the use of incorrect replacement parts or from unauthorized modifications to the unit.