Presto Lifts LIFT-STIK Owner's Manual page 27

Traverse: Procedure for attaching and locking four Lifting straps (example)
Boom and traverse
Insert the two spinning locking pins
into the holes of the traverse
in the upper left and right corner.
Control all Spring locking pin
The two Spring locking pin must be locked.
l
Control lifting straps and load
The tool must be lowered to the lowest possible position, when steering the lift.
l
The load must be in balance and must not swing, when steering the lift.
l
Ensure that the Lifting straps are not tangled.
l
Presto Lifts
2x spinning locking pins
1:
Then insert the spring locking pin
into the hole of
the spinning locking pin.
2x Spring locking pin
...and through
the holes of the two lifting straps
and the traverse.
3:
27
4x Lifting strap
2:
PLS67-285 Manual