Introduction; Responsibilities Of Owner And Users - Presto Lifts LIFT-STIK Owner's Manual

1

Introduction

This manual attempts to provide all of the information necessary for the safe and proper
installation, operation and maintenance of the Presto Lifts Lift Stik. It is important that all
personnel involved with the installation, maintenance or operator of the stacker read this
manual. Additional manuals are available upon request or at www.prestolifts.com.
Each of the Presto Lifts stackers is equipped with nameplate, serial number and model
identifications. Please refer to these numbers when ordering parts or requesting further
information.
The Presto Lifts stackers are designed for lifting, lowering and positioning a wide variety of
loads. Where unique situations arise which are not covered in this manual, call Presto Lifts for
further instructions.
The battery-operated stackers are designed for in-plant/non-hazardous locations only. These
units are not for personnel lifting. All equipment is manually propelled and powered vertical
travel.
1.1

Responsibilities of Owner and Users

Basic Principles - Owners/users shall apply sound principles of safety, training, inspection,
maintenance to the expected operating environment. It shall be the responsibility of the owner/
user to advise the manufacturer where deflection may be critical to the application.
Manuals - Owners/users shall keep and maintain a copy of the operating and maintenance
manual(s) and ensure its availability to operating and maintenance personnel.
Inspection and Maintenance - It shall be the responsibility of the users to inspect and
maintain the machine as required to ensure proper operation. The frequency of inspection and
maintenance shall be based upon the manufacturer's recommendations and be compatible
with operating conditions and the severity of the operating environment. Machinery that is
not in proper operating condition shall be immediately removed from service until repaired.
Maintenance and repairs shall be made by a qualified person and the repairs shall be in
conformance with the manufacturer's recommendations.
Maintenance Safety Precautions - Before adjustments and repairs are started on the
machine, the following precautions shall be taken as applicable:
1. Remove the load from the platform.
2. Lower platform to the full down position.
3. All controls in the "off" position and all operating features secured from inadvertent
motion by brakes, blocks, or other means.
4. Disconnect power and follow established owner/user lockout/tag out policies.
5. Follow precautions and directions as specified by the manufacturer.
Replacement Parts - When parts or components are replaced, they shall be replaced with
parts or components approved by the original manufacturer.
Maintenance Training - The user shall ensure only qualified personnel inspect and maintain
the machine in accordance with the manufacturer's recommendations.
Presto Lifts 4 PLS67-285 Manual