Installation - Presto Lifts LIFT-STIK Owner's Manual

4

Installation

Setup of this machine shall be performed by trained and/ or qualified personnel only. The
owner/ installer is responsible obtaining any necessary permission and/ or permits. The owner/
installer is responsible for compliance with all applicable codes and ordinances. Read and
understand all safety and installation information in this manual.
Unless otherwise stated this machine shall only be used indoors in light industrial, laboratory,
and office applications. It should not be exposed to the elements. It shall be setup and
operated on a solid, smooth and level surface capable of supporting the machine and its
maximum rated capacity.
Before setup, remove all shipping materials and verify all components on the packing list
were received. Inspect the machine, all components, wiring, electrical connections, hydraulic
hoses and fittings for damage. Presto Lifts tests and inspects every piece of equipment prior
to shipment. If damage is apparent, a freight claim must be filed with the freight company.
If components are missing, contact the freight company and/or the manufacturer before
continuing installation.
With the lift in a lowered position, check for signs of damage especially to the back cabinet that
houses the battery and power pack, check base frame for dimensions and structural integrity,
inspect for any bent or damaged metal parts, check to see if the wheel locking system is in
working condition, ensure battery cables are connected to the battery and ensure the battery is
fully charged before using.
High Voltage: Electrical service and installation must be performed by trained and/
or qualified personnel. Lock-out/ tag-out the power source before installation.
The charger is equipped with an AC electric cord having an equipment-grounding
conductor and ground plug. Never alter this cord/plug. It must be inserted into
a properly installed/specified outlet in accordance with all local codes and
ordinances.
DC motors and AC chargers can create sparks. Do not set up this machine in an
area where flammable gases may be present.
All electrical components must be protected from wet and/or dirty environments
unless specifically configured for such environments.
Pinch points and Crush Hazards exist when moving and transporting the machine.
Do not enter under any equipment while moving or transporting. Keep hands, feet,
and loose clothing away from moving equipment.
Never enter beneath the platform unless the machine is unloaded and secured
against lowering.
This machine does not have safety toe guard protection.
Presto Lifts 15 PLS67-285 Manual