Page 1
Lift Stik PLS52-185 PLS48-230 PLS60-220 PLS48-450 Installation, Operation and Service Manual Model Number ___________________ Serial # _________________________ Date Placed in Service _____________ IMPORTANT: READ CAREFULLY BEFORE INSTALLING OR OPERATING LIFT Part orders are subject to a $50 minimum charge. March 2020...
Page 2
This label (part # 10095524) is required by California law. For more information visit www.65Warnings.ca.gov. This label (part # 10095524) is required by California law. For more information visit www.P65Warnings.ca.gov. PRESTO OWNER’S MANUAL Page 2 LIFT STIK...
Page 3
C O N T E N T S S E C T I O N 1: Introduction ......................4 Responsibility of Owners and Users ...............5 S E C T I O N 2: Safety Alert Symbols and Signal Words ..............6 Safety ........................7 S E C T I O N 3: Installation .......................7 A.
Page 4
This manual attempts to provide all of the information necessary for the safe and proper installation, operation and maintenance of Presto Lifts Inc. Lift Stik. It is important that all personnel involved with the installa- tion, maintenance or operator of the stacker read this manual.
Responsibility of Owners and Users Inspection and Maintenance The device shall be inspected and maintained in proper working order in accordance with Presto’s owner’s manual. Removal from Service Any device not in safe operating condition such as, but not limited to, excessive leakage, missing rollers, pins, or fasteners, any bent or cracked structural members, cut or frayed electric, hydraulic, or pneumatic lines, damaged or malfunctioning controls or safety devices, etc.
SAFETY ALERT SYMBOLS AND SIGNAL WORDS The safety of all persons operating, maintaining, repairing, or in the vicinity of this equipment is of paramount concern. This is a powerful machine with moving parts, and is capable of causing personal injury if proper precautions are not taken.
OPERATOR DAILY OPERATIONS MAINTENANCE CHECKS: INSTRUCTIONS Battery A. Check for corroded and loose terminals. WARNINGS A white powder substance will be present if there is any existing corrosion. DO NOT use this lift until you have been trained and B. Visually inspect for any cracks or damage authorized to do so.
IN INJURY AND/ OR DAMAGE TO LOAD AND the instructions for the battery charger they are EQUIPMENT. available free of charge by calling Presto Lifts @ 1-800-343-9322. Inspect the lift for damaged or worn parts. Do not use if not in safe operating condition.
Page 10
IF THESE INSTRUCTIONS ARE NOT CLEAR OR other. IF THERE ARE ANY QUESTIONS PLEASE CON- TACT PRESTO LIFTS INC. 1. When hooking up the charger, attach the plug into the twist-lock receptacle on the side of the battery box or connect the clips directly to the battery on units that are not pre-wired with a plug on the side of the battery box.
Page 11
Figure 1: Components Diagram ITEM DESCRIPTION Motor Battery Circuit board Control unit Caster with brake Caster, fixed wheel Caster, fixed wheel Main switch Battery charger PRESTO OWNER’S MANUAL Page 11 LIFT STIK...
Page 12
Figure 2: Specifications The maximum load refers to the load being uniformly distributed over the entire platform on the basic performance of each work positioner model. If the accessory is added by the purchaser, a new weight decal might be required on the work positioner. G = Center of gravity H = Maximum platform height Q = Maximum permitted load (capacity)
S E C T I O N 6 Operator Daily Checks MAINTENANCE DAMAGE: Check for bent, dented, worn or broken parts. Operation of Presto Lift Stik is very simple — as is their construction. They require very little maintenance. WHEELS AND CASTERS: Check for wear and that Reasonable care will result in excellent trouble-free they are turning smoothly.
Page 14
SPARE PARTS Figure 3: 4 12 10 9 PLS52-185 PLS48-230 PLS60-220 PLS48-450 Motor Contact Parts Department Battery 2999100 * 2999100 * 2999100 * 10037904 * Circuit board Contact Parts Department Charger cable R86007-02 R86007-02 R86007-02 R86007-02 Control unit w/ cable...
Ordering Replacement Parts Presto Lifts has carefully chosen the components in your unit to be the best available for the purpose. Replacement parts should be identical to the original equipment. Presto Lifts will not be responsible for equipment failures resulting from the use of incorrect replacement parts or from unauthorized modifications to the unit.
PARTS Standard parts may be returned with a 20% restocking fee. Modified or custom-engineered parts are not returnable. Unfortunately, due to potentially concealed damage, all sales of electrical assemblies are final. QUALITY ISSUES Should you feel there is a quality problem, please contact the seller to ask questions and gather information on how to rectify the issue.
Page 27
Canada, or Mexico have thirty (30) days from date of RGA issue to have the product arrive at Presto Lifts’ facility. All merchandise must arrive Free on Board at Presto Lifts’ facility or the shipment will be refused and returned to the sender. All credits are issued less restocking and refurbishing charges, regardless if the merchandise was damaged in transit.
Page 28
Presto Lifts with the machine’s serial number. Any claim for breach of this warranty must be received in writing by Presto Lifts within the war- ranty period. Warranties shall not cover failure or defective operation, caused by misuse, misap- plication, negligence or accident, exceeding recommended capacities, or any alteration or repair of the item purchased which has not been authorized by Presto Lifts.
Need help?
Do you have a question about the PLS52-185 and is the answer not in the manual?
Questions and answers