Set Up A Wideband Standard Headset; Enable An E-Hookswitch Headset; Cisco Headset Customization; Adjust Your Bass And Treble - Cisco 8851NR User Manual

CISCO 8800 SERIES

Set Up a Wideband Standard Headset

You can use a headset that supports wideband audio. Wideband audio improves the quality of the sound you
hear in the headset.
Procedure
Step 1 Press Applications
Step 2
Select Accessories > Analog headset > Setup.
Step 3 Press On or Off to enable or disable wideband for the analog headset.
Step 4
Press Return .

Enable an E-Hookswitch Headset

Electronic Hookswitch headsets use a base station and a wireless headset. The base station plugs into your
phone headset jack. After installing the headset, you enable it on the Cisco Unified Communications Manager.
Procedure
Step 1 Press Applications
Step 2
Navigate to Settings > E-Hookswitch connected.
Step 3 Select Yes.

Cisco Headset Customization

Some Cisco 500 series headsets are available with a USB adapter that allows you to customize your settings.
The headset retains the settings when you switch phones.
You can customize your headset settings if you have one of the following Cisco headsets:
• Cisco Headset 521 and 522
• Cisco Headset 531 and 532
Related Topics
Cisco Headset 500 Series, on page 94

Adjust Your Bass and Treble

You can adjust the bass and treble to customize the headset sound. If you like a headset with a lot of bass,
then adjust toward the warm setting. If you prefer more treble, then adjust toward the bright setting.
GoMomentum.com
.
.
110
USER GUIDE
888.538.3690