Adjust The Video Brightness; Adjust The Video Bandwidth; View Video Calls On Your Computer - Cisco 8851NR User Manual

CISCO 8800 SERIES

Adjust the Video Brightness

If the lighting in your office makes it hard to see the video, you can adjust the brightness.
Procedure
Step 1
Turn the ring around the camera clockwise to open the shutter.
Step 2
Press Applications
Step 3 Select Settings > Video > Exposure.
Step 4
Press the Navigation cluster left to decrease, or right to increase, the brightness.
Step 5 Press Save.

Adjust the Video Bandwidth

During a video call, your video can suddenly stop or lag behind the audio. The lag is often caused by a busy
network.
By default, your phone automatically selects a bandwidth setting that balances the audio and video network
requirements. If you frequently see a video lag, you can select a fixed bandwidth. We suggest that you start
at the lowest setting, and only increase the setting if the video lag continues.
Procedure
Step 1 Press Applications
Step 2
Select Settings > Video > Bandwidth.
Step 3 Select a bandwidth setting.
Step 4
Press Save to set the bandwidth.

View Video Calls on Your Computer

You can view the video part of a call on your computer instead of the phone screen. The audio part of the call
remains on your phone.
Before you begin
Connect the computer to the PC port of your phone with an Ethernet cable, and login to Cisco Jabber for
Windows or Cisco Jabber for Mac. The phone must be connected to the first network interface card (NIC1)
in the computer.
The phone PC port is disabled when Wi-Fi is enabled on your phone.
You need the latest version of Cisco Media Services Interface (MSI) and one of the following products:
• Cisco Jabber for Windows 9.7(5) or later
GoMomentum.com
.
.
88
USER GUIDE
888.538.3690