Hold Calls; Put A Call On Hold; Answer A Call Left On Hold For Too Long; Swap Between Active And Held Calls - Cisco 8851NR User Manual

CISCO 8800 SERIES
Step 2
Press Mute again to turn mute off.

Hold Calls

Put a Call on Hold

You can put an active call on hold and then resume the call when you're ready. When you place a video call
on hold, video transmission is blocked until you resume the call.
Procedure
Step 1
Press Hold
Step 2 To resume a call from hold, press Hold again.

Answer a Call Left on Hold for Too Long

When you've left a call on hold too long, you'll be notified with these cues:
• Single ring, repeating at intervals
• Flashing amber line button
• Flashing message indicator on the handset
• Visual notification on the phone screen
Procedure
Press the flashing amber line button or Answer to resume the held call.

Swap Between Active and Held Calls

You can easily switch between active and held calls.
Procedure
Press Swap to switch to the held call.
GoMomentum.com
.
50
USER GUIDE
888.538.3690