Adjust The Headset Feedback; Set Up A Wideband Standard Headset; Enable An E-Hookswitch Headset; Swap Headsets While On A Call - Cisco 7800 Series User Manual

CISCO 7800 SERIES

Adjust the Headset Feedback

When you use a headset, you can hear your own voice in the earpiece, which is called headset sidetone or
headset feedback. You can control the amount of headset sidetone on your phone.
Procedure
Step 1
Press Applications
Step 2 Select Settings > Headset sidetone.
Step 3
Select a setting.

Set Up a Wideband Standard Headset

You can use a headset that supports wideband audio. Wideband audio improves the quality of the sound you
hear in the headset.
Procedure
Step 1 Press Applications
Step 2
Select Accessories > Analog headset > Setup.
Step 3 Press On or Off to enable or disable wideband for the analog headset.
Step 4
Press Return .

Enable an E-Hookswitch Headset

Electronic Hookswitch headsets use a base station and a wireless headset. The base station plugs into your
phone headset jack. After installing the headset, you enable it on the Cisco Unified Communications Manager.
Procedure
Step 1 Press Applications
Step 2
Navigate to Settings > E-Hookswitch connected.
Step 3 Select Yes.

Swap Headsets While on a Call

You can connect an analog headset, a Bluetooth headset, and a USB headset simultaneously to your phone.
However,you can use only one headset at a time.
GoMomentum.com
.
.
.
71
USER GUIDE
888.538.3960