Add Another Person To A Call; Swap Between Calls Before You Complete A Conference; View And Remove Conference Participants - Cisco 8851NR User Manual

CISCO 8800 SERIES
When you add more than one person to a conference call, wait a few seconds between adding participants.
As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.

Add Another Person to a Call

When you add more than one person to a call, wait a few seconds between adding participants.
Procedure
Step 1 From an active call, press Conference
Step 2
Add the other person to the call by doing one of the following:
• Press Active calls and select a held call.
• Enter the phone number and press Call.
Step 3 Press Conference.

Swap Between Calls Before You Complete a Conference

You can talk to a person before you add them to a conference. You can also swap between the conference
call and the call with the other person.
Procedure
Step 1
Call a new conference participant, but do not add the participant to the conference.
Wait until the call is connected.
Step 2
Press Swap to toggle between the participant and the conference.

View and Remove Conference Participants

If you create a conference, you can view the details of the last 16 participants who join the conference. You
can also remove participants.
Procedure
Step 1 While you are in a conference, press Show Details to view a list of participants.
Step 2
(Optional) Highlight a participant and press Remove to drop the participant.
GoMomentum.com
.
54
USER GUIDE
888.538.3690