Standard Base For Cisco Headset 561 And 562 - Cisco 8851NR User Manual

CISCO 8800 SERIES
Number Name
2 Mute button
3 Volume button
4 LED

Standard Base for Cisco Headset 561 and 562

The Cisco Headset 561 and 562 come with a standard base to charge your headset. The base's LED display
shows the current battery level, and your call state. In addition to the call control buttons on the headset, you
can also answer and end calls when you lift or set down your headset on the base.
The connection between the base and the headset is made with Digital Enhanced Cordless Telecommunications
(DECT).
Figure 19: LED Display on the Standard Base for Cisco 561 and 562 Headset
The following table describes the standard base for Cisco 561 and 562 Headset.
Table 23: Standard Base for Cisco 561 and 562 Headset
Number Name
1 Battery Status LED
GoMomentum.com
Description
Toggle the microphone on and off. The Mute
when Mute on the headset is enabled.
Adjust the volume on your headset.
Shows the headset status:
• Blinking red—Incoming call.
• Steady red—Active call.
• Blinking white—Firmware upgrade is in progress.
Description
Indicates the headset battery charge.
101
USER GUIDE
on the phone lits up
888.538.3690