Installing The Memory Unit - Ricoh AP204 Operator's Manual

Installing the Memory Unit

Important
The memory unit can be damaged
by small amounts of static electric-
ity. Before touching it, touch some-
thing metal to remove static electric-
ity from you.
A
Turn off the printer's power switch
and remove all cables and cords
from the printer.
B
Remove both screws and remove
the printer board from the printer
as shown in the illustration.
Note
A coin can be used to remove the
screws.
C
Align the memory unit as shown
in the illustration. Tilt it back-
wards so that it is 45 degrees from
perpendicular to the printer board
(1 1 1 1 1 ), and slide it into the slot. Then
tilt it forwards so that it is perpen-
dicular to the board (2 2 2 2 2 ). It should
make an audible click as it pops
into place.
Note
When aligning the memory unit,
notice that the lower corner of
one side has a notch (a). This is
TPOP130E
to prevent you from installing
the unit backwards.
Installing the Memory Unit
(a)
TPOP140E
2
9