Ricoh AP204 Operator's Manual page 37

Installing Options
F
Place the paper feed unit on a flat
surface.
2
G
Lift the printer using the inset
grips on both sides of the printer.
Important
It is recommended that at least
two people are used to lift the
printer.
H
Align the printer onto the 3 up-
right pins [G] on the paper feed
unit and then lower it gently.
18
I
Insert the securing bracket [H1]
into the rectangular hole on the
right lower side of the printer. Se-
cure the bracket using a screw [I1].
TPOP220E
J
Insert the securing bracket [H2]
into the rectangular hole on the left
lower side of the printer. Secure
the bracket using a screw [I2].
TPOH110E
K
Remove the connector cover [J]
from the printer, and the connec-
tor cover [K] from the paper feed
unit.
[J]
[G]
TPOP230E [K]
TPOP252E
1
[H ] [I ]
2 2
2
1
[H ] [I ]
1 1
2
TPOP242E
TPOP280E