Installing Memory Unit Typeb 64Mb - Ricoh AP2600 Setup Manual

Installing Options
Installing Memory Unit TypeB
64MB
Important
The Memory Unit can be damaged
by small amount of static electrici-
2
ty. You should touch some metal
to discharge static electricity.
A
Check the contents of the box for
the following items:
• Memory Unit
• Installation Guide
B
Be sure to check the following
points:
• The power switch is turned off.
• The power cord is unplugged
from the wall outlet.
• The interface cable is un-
plugged from the printer.
Note
If the Duplex Unit is not in-
stalled, go to step D.
C
If the Duplex Unit is installed,
push down the lever on right side
(A A A A ) and pull it out until the Du-
plex Unit stops (B B B B ).
Zcex320j.eps
22
D
Use a coin to remove the two
screws.
Note
The removed screws are re-
quired in step K.
ZCEX280E.eps
E
Pull out the handle of the control-
ler board.
ZCEX370J.eps
F
Pull the handle and slide the con-
troller board out.
ZCEX260J.eps
G
Place the controller board on a flat
surface.