Table of Contents
Advertisement
1 Press {U}
{U}
{U}
{U} {T}
{U}
{T}
{T}
{T} until the following message appears.
{T}
<System Menu>
39.Active PTL.T
2 Press { { { { { Enter} } } } } .
The current setting appears on the panel display.
<Active PTL.>
*All Active
{U}
{U}
{T}
{T}
3 Press {U}
{U}
{U} {T}
{T} until the protocol you want to use appears.
{T}
4 Press { { { { { Enter} } } } } .
E
If you use TCP/IP, you should assign the IP address to your printer.
Note
To get the IP address for your printer, contact your network administrator.
1 Press {U}
{U}
{U}
{U}
{U} {T}
{T}
{T}
{T} until the following message appears.
{T}
<System Menu>
32.IP ADDRESS T
2 Press { { { { { Enter} } } } } .
The current IP address appears on the panel display.
011.022.033.044
U
{U} {T}
{U} {T}
3 Use {U} {T}
{U} {T}
{U} {T} to specify the leftmost digit of the IP address.
111.022.033.044
U
4 Press { { { { { Enter} } } } } .
The pointer (U) moves to the next digit as shown.
111.022.033.044
U
Note
You can return the pointer (U) to the previous (left) digit by pressing {Es-
cape}.
If you press {Escape} when the pointer (U) is on the leftmost position, the
specified IP address is reset.
{U} {T}
{U} {T}
{U} {T} to specify the second digit of the IP address.
5 Use {U} {T}
{U} {T}
191.022.033.044
U
6 Press { { { { { Enter} } } } } .
7 Repeat steps 5 and 6 to specify the rest digit of IP address.
191.168.015.016
Setting Up the Printer for Network with the Operation Panel
U
U
T
U
UT/#
UT/#
UT/#
UT/#
U
3
25
Advertisement
Chapters
Table of Contents
Troubleshooting
