Ricoh AP204 Operator's Manual page 127

Appendix
Low Memory
The error message shown below is output by the printer whenever there is not
enough memory to print your data.
Note
If you are using the RICOH-SCRIPT 2, see the documentation that comes with
it for information about its memory.
The following are the actions you should take when you encounter memory
shortage problems. If these actions do not solve the problem individually, try
them in combination with each other.
1. Increase printer memory.
Install the optional memory unit to increase printer memory capacity. => P.9
"Installing the Memory Unit"
2. Reduce resolution.
Use the printer driver to set resolution to 300dpi.
=> The printer driver online help.
=> "RICOH-SCRIPT 2 Operating Instructions"
3. Turn on "Image Memory".
Use the printer's "System Menu" to turn on "Image Memory". => P.91 "Mak-
ing Printer Settings with the Operation Panel"
8
108