Ricoh AP204 Operator's Manual page 259

Using RICOH-SCRIPT2 with Windows
this, use toner saving only for proofing and intermediate drafts, but
turn it off for final prints when top quality is important.
• Dithering
Use this to set the image mode. The following items are available: [Photo-
graphic] and [Text].
Installable options
This box shows the options installed to the printer.
2
When selecting an option inside the upper list of this group, its current setting
appears in the [Change setting for:] box. The following settings are available in
the [Change settings for:] box.
For the optional tray unit: [None], [Tray 2] (option)
For the optional memory unit (VMOption): [16 MB RAM], [32 MB RAM], [48 MB
RAM]
Reference
For more information on the Color Setting, Color Profile, and Dithering, see
P.51 "RPS2 Menu".
[PostScript] Tab
Use this tab to specify the output format of the PostScript files and the data pro-
cessing method.
On the [PostScript] tab, click [Advanced] to display the [Advanced PostScript Op-
tions] dialog.
When the printer is connected to the network.
Uncheck both [Send CTRL+D before job] and [Send CTRL+D after job].
When the printer is connected to your computer via parallel interface cable.
Check both for [Send CTRL+D before job] and [Send CTRL+D after job]. Also, make
sure that [ASCII data] is checked. If it is not checked, check it.
Reference
For more information on the PostScript headers, see P.29 "Windows Headers".
For more information on the network, see P.30 "Windows Network Environ-
ment".
18