NetWare Configuration
Installing the NIB Setup Tool
A utility called the NIB Setup Tool is provided to configure your printer to work
in a NetWare environment. Installing the PRINTER MANAGER FOR ADMIN-
ISTRATOR installs the NIB Setup Tool to your printer. This section describes
how to install the PRINTER MANAGER FOR ADMINISTRATOR, and how to
run the NIB Setup Tool.
Limitation
NetWare 3.x or 4.x must be functional to run the NIB Setup Tool.
3
The NIB Setup Tool is supported to work with the following operation sys-
tems.
• Microsoft
• Microsoft
Installing the PRINTER MANAGER FOR ADMINISTRATOR
Follow these steps to install the PRINTER MANAGER FOR ADMINISTRATOR.
Preparation
You should install the PRINTER MANAGER FOR ADMINISTRATOR on
your computer. If you install it on a file server and execute it via the network,
it might not work correctly.
Be sure to close all applications before starting the installation procedure.
A
Insert the CD-ROM that comes with your printer into your computer's CD-
ROM drive.
B
Open [Control Panel], and double click the [Add/Remove Programs] icon.
C
In the [Install/Uninstall] tab, click [Install].
D
Click [Next >].
E
Input the name of the CD-ROM drive in the [command line for installation
program] box, followed by "\NETWORK\PRINTMAN\ADMIN\SET-
UP" (do not include the quotation marks) and then click "Finish".
Note
An example would be "D:\NETWORK\AFICIOMN\ADMIN\SETUP "
when the drive name is "D".
F
After the [Welcome] dialog appears, click [Next >].
G
The Software License Agreement appears.
24
®
®
Windows
95/98
®
®
Windows NT
4.0