Ricoh AP204 Operator's Manual page 261

Using RICOH-SCRIPT2 with Windows
H
Change the drive name in the list box to the name of the CD-ROM drive,
and then click [Browse].
Note
The Windows NT4.0 printer driver is in the following folder on the CD-
ROM: \DRIVERS\RPS2\NT4\(language).
I
In the [Folders] box, double-click [Drivers], [RPS2], and then [NT4]. Then dou-
2
ble-click the folder of the appropriate language. Finally, click [Open].
J
Click [OK].
A printer model selection dialog appears.
K
Select the name of the printer whose driver you want to install by clicking
it, and then click [Next].
A dialog for changing the printer name appears.
L
Change the name of the printer if you want, and then click [Next].
M
Click [Next].
N
In the next dialog asking if you want to print a test page, select [No] and
then click [Finish].
The installer copies the printer driver files from the CD-ROM to your comput-
er's hard disk.
Note
Perform a test print after completing installation and restarting Windows.
O
If you are asked to insert the Windows NT4.0 system disk, insert it into
your computer, and then click [OK].
P
If you are asked to specify the driver of the system disk, specify the drive
of the Windows NT4.0 system disk.
Q
If you are asked to specify the location of the required file, select the appro-
priate folder. The location of the appropriate folder may differ depending
on the version of your operating system. The following is an example:
• folder named [i386] of the Windows NT4.0 system disk.
After installation is completed, the [Printers] window appears with the icon of
the newly installed printer.
R
If you are asked if you want to restart Windows, select [Yes]. If you are not
asked, restart Windows after completing the installation.
S
After Windows restarts, set up any options you have installed to your print-
er.
20