Replacing The Fuser Oil Bottle And Ozone Filter - Ricoh AP204 Operator's Manual

D
Insert the new waste toner bottle
into the waste toner bottle holder,
and return the holder to its origi-
nal position.
E
Close the front cover. Press the
center of the front cover until it
locks into place.
Replacing the Fuser Oil Bottle
and Ozone Filter
Replace the oil bottle and ozone filter
after the message shown below ap-
pears on the panel display.
R CAUTION
• Do not incinerate the oil bottle.
This action could cause a fire or
TPOH610E
getting burned.
R CAUTION
• Spilt oil is very slippery. If oil is
spilt, wipe it with alkaline
cleaner. Otherwise, the oily sur-
faces can create the danger of
slipping and personal injury.
• When accessing the inside of
the machine, do not touch any
sections other than those speci-
fied in this manual. If you do, it
might result in receiving a burn
or injury.
Important
Dispose of used ozone filters as gen-
eral burnable refuse.
A
Slide the top cover open lever to-
wards the front of the printer, and
open the top cover.
Replacing Consumables
Add Fuser Oil
6
TPOH620E
87